ASA
Packet Tracer uses a simplified model of the Cisco Adaptive Security Appliance Software. Click on the CLI tab in the ASA configuration window to access the Cisco command line interface. Use the Copy and Paste buttons to copy and paste text to and from the command line. This page lists the command tree for Packet Tracer ASA. The tree contains only command chains that are supported in Packet Tracer.
User Mode
-
enable [ <0-15> ]
-
exit
-
logout
-
ping
[ ip | ipv6 | WORD ]
-
quit
-
show
-
traceroute [ ip | WORD ]
|
Enable Mode
-
configure
[ terminal ]
-
copy
- disk0:
- running-config
- startup-config
- tftp:
- flash:
- running-config
- startup-config
- tftp:
-
running-config
-
disk0:
-
flash:
-
startup-config
-
tftp:
-
startup-config
-
disk0:
-
flash:
-
running-config
-
tftp:
-
tftp:
-
disk0:
-
flash:
-
running-config
-
startup-config
-
dir
-
exit
-
logout
-
ping [ ip | ipv6 | WORD ]
-
reload
-
show
- access-list
- activation-key
- arp
- clock
- crypto
- isakmp [ sa ]
- ipsec [ sa ]
- map
- crypto key mypubkey rsa
- dhcpd
- disk0:
- file system
- flash:
- interface
- inside
- outside
- Ethernet <0>/<0-7>
- Vlan [<1-4090>]
- ip brief
- ip address
- ipv6
- access-list
- interface brief
- neighbor
- route
- nat
- ntp status
- route
- running-config
- ssh
- startup-config
- switch vlan
- version
- vlan
- xlate
-
traceroute [ ip | WORD ]
-
write [ erase | memory ]
|
Global Mode
Ethernet Interface Mode
- exit
- ip
- nameif [ WORD ]
- security-level <0-100>
- shutdown
- switchport access vlan <1-4090>
|
VLAN Interface Mode
- exit
- forward
- ip
- ipv6
- access-list [ WORD ] [ deny | permit ]
- [ icmp | icmp6 | object-group WORD | tcp | udp ]
- [A.B.C.D A.B.C.D | any A.B.C.D | host A.B.C.D | object WORD A.B.C.D ]
- [ echo | echo-reply | unreachable ]
- route
- nameif [ WORD ]
- security-level <0-100>
- shutdown
|
Class-Map Configuration Mode
- exit
- match
- access-list [ WORD ]
- any
- default-inspection-traffic
|
Group-policy Configuration Mode
- exit
- webvpn
- vpn-tunnel-protocol ssl-clientless
|
Object Configuration Mode
- description [ LINE ]
- host [ A.B.C.D | X:X:X:X::X ]
- nat ( Open parenthesis for (<internal_if_name>,<external_if_name>) pair
- subnet [ A.B.C.D A.B.C.D | X:X:X:X::X<0-128>]
|
Object-group Configuration Mode
- description [ LINE ]
- port-object
- eq [ domain | www | <0-65535> ]
- range [ <0-65535> ] [ <0-65535> ]
-
|
Webvpn Configuration Mode
- enable password [ WORD ] [ encrypted | level <1-15> encrypted ]
- exit
|
Rommon Mode
-
address addr
-
boot args
-
clear
-
confreg value
-
dev
-
file name
-
gateway addr
-
help
-
history
-
interface name
-
reboot
-
reload
-
repeat arg
-
reset
-
server addr
-
set
-
show cmd
-
tftpdnld
-
unset varname
|